Drip Irrigation Pipe (Socket) Fittings-Product Center-Hebei Runtian Water-Saving Equipment Co., Ltd.

PE socket-type end caps are commonly used fittings for drip irrigation tubing and PE lateral pipes, installed at the end of PE pipes or drip irrigation lines to provide a shut-off function. Another frequently used option is the PE double-ring end cap, which serves the same purpose as the socket-type end cap.

16 Socket-and-Plug Bypass

PE socket-type bypass fittings are specifically designed for use with PE pipes and are supplied with a matching hole-punching tool. These socket-type bypass fittings feature barbs and, when required, can be used with T-shaped rubber gaskets (also known as “T-rings”). The installation process is simple, quick, and saves both time and effort.

16 Socket-and-Plug Tee

PE承插三通采用优质的新型工程材料加工制作而成，用来连接PE管及滴灌管，起到了分流的作用。

16 Socket-Weld Elbow

The double-ring plug features a simple structure and is easy to use. It is primarily employed as a cap for small-diameter emitters and drip irrigation tubing. Made from a new type of engineering material, the product is cost-effective, wear-resistant, aging-resistant, highly reusable, and boasts a long service life.

16 Socket-and-Plug Straight Connector

16. The socket-and-spigot straight connector is an essential fitting for joining drip irrigation tape to the main pipeline, ensuring smooth water flow. Its socket and spigot sections are ingeniously designed for easy connection to both the drip tape and the main pipe.

16 double-ring plugs

The double-ring plug features a simple structure and is easy to use. It is primarily employed as a cap for small-diameter emitters and drip irrigation tubing. Made from a new type of engineering material, the product is cost-effective, wear-resistant, aging-resistant, highly reusable, and boasts a long service life.

20 Socket-and-Plug Plug

PE socket-type end caps are commonly used fittings for drip irrigation tubing and PE lateral pipes, installed at the end of PE pipes or drip irrigation lines to provide a shut-off function. Another frequently used option is the PE double-ring end cap, which serves the same purpose as the socket-type end cap.

20 Socket-and-Plug Bypass

PE socket-type bypass fittings are specifically designed for use with PE pipes and are supplied with a matching hole-punching tool. These socket-type bypass fittings feature barbs and, when required, can be used with T-shaped rubber gaskets (also known as “T-rings”). The installation process is simple, quick, and saves both time and effort.

20 Socket-and-Plug Straight Connector

PE socket-and-spigot straight connectors are manufactured from high-quality engineering plastics, with the addition of special additives and produced using specialized processes, primarily for use in piping applications. Based on the compatibility with corresponding pipe fittings, the commonly available specifications and models currently produced by our company are Φ16, Φ20, and Φ25.

20 double-ring plugs

The double-ring plug features a simple structure and is easy to use. It is primarily employed as a cap for small-diameter emitters and drip irrigation tubing. Made from a new type of engineering material, the product is cost-effective, wear-resistant, aging-resistant, highly reusable, and boasts a long service life.

25 Socket-and-Plug Bypass

The 25 mm socket-and-spigot bypass fitting for drip irrigation tubing is designed to connect drip lines to the main supply line, ensuring smooth water flow and uniform moisture distribution to crops. Its socket-and-spigot design facilitates easy installation, saves space, and enhances irrigation efficiency.

25 Socket-and-Plug Straight Connector

Drip irrigation pipe fittings—25 mm socket-and-spigot straight connectors—are an essential component of modern irrigation systems, widely used in agricultural irrigation due to their unique advantages and characteristics.

T-ring

The rear end of the T-shaped ring is made of nitrile rubber reinforced with fabric, providing a self-sealing function. Its operating principle is straightforward: it automatically adjusts the sealing contact area in response to changes in internal pipeline pressure.

Socketed tee

PE socket-type tees are typically used at branch points in PE hose connections, with installation achieved using matching steel clamps and rubber gaskets. This connection method allows for quick and convenient assembly and disassembly, offers excellent sealing performance, high structural strength, and a long service life, making it widely employed in large-scale micro-sprinkler irrigation projects.

Socket-welded elbow

PE socket-welded elbows are manufactured from high-quality, advanced engineering materials. The products offer excellent resistance to a wide range of acidic and alkaline corrosives, outstanding aging resistance, smooth valve operation, and a long service life.

Socketed straight-through

The socket-and-spigot straight connector is a critical component for joining drip irrigation tubing to the main supply line or to other drip irrigation tubes. It is typically manufactured in standard lengths to ensure easy compatibility and connection with other pipe fittings. Made from high-quality plastic or metal, these connectors offer excellent corrosion resistance, making them suitable for a wide range of harsh environmental conditions.